The application of landscape bricks is very extensive in our lives. In order to fully demonstrate its advantages, it is necessary to do a good job in construction work. In order to help everyone better understand and carry out construction operations, this article shares with you its construction preparation and details.
1、 Product characteristics
If there are concave and convex textures or split bricks with sand surfaces on the surface, special attention should be paid to hygiene during construction, and the surface should not be contaminated by adhesives, coatings, cement, etc., otherwise it will be difficult to clean.
2、 Selection of adhesives and sealants
1. Adhesive: Choose a matching adhesive that is similar in color to the product for better results.
2. Joint filling: A matching joint filling agent should be selected for better results.
Attention: In order to prevent the recurrence of alkali in sintered bricks, low alkaline or non alkaline binders and joint fillers should be used.
3、 Preparation of construction tools
1. Adhesive; 2. Angle ruler; 3 mortar buckets; 4. Handheld electric mixer; 5. Paper cutting knife; 6. Grey knife; 7. Sawtooth trowel, 8. Joint filler; 9. Joint filling machine or special plastic bag for joint filling; 10. Gun nail; 11. Jointing steel bars; 12. Brush.
4、 Requirement for leaving seam stickers and sealing seam stickers
1. Leave seam sticker: The method and width distance of leaving seams in sintered bricks should be determined according to the drawing requirements; If necessary, the excess grout should be scraped off, otherwise it will directly affect the filling and pointing function.
2. Tight joint paste: Interior walls can be sealed with tight joint paste, or a 0.5-1mm fine joint can be left uniformly to better showcase the three-dimensional feeling of the bricks.
5、 Requirements for filling and pulling seams
Joint filling: All joints should be filled. Choosing a joint filling machine can better fill and point the joints, while maintaining cleanliness. In addition, plastic bags can also be used.
Stitching: Matching pointed steel bars should be used for stretching and pointing, and the pulled out joints should be lubricated, saturated, and deeply concave.
The above are the details of the construction operation of landscape bricks. During construction, not only should we prepare construction tools, choose adhesives, etc., but also meet some construction requirements. They all affect the construction effect together, so every detail should be paid more attention to.
Editor: Becky